Window drafts are a common but serious problem. Not only do they cause discomfort, but those drafts can also rapidly increase the cost of heating and cooling. No one wants to deal with this issue. You need to figure out why your windows are leaking and correct the problem as soon as possible.
Before you can fix your drafty windows, you need to know where the problem originates. Pinpointing the cause of your problem can change the urgency and the solution. Renewal by Andersen® of New Jersey highlights all of the major causes for window drafts below.
1. Cracked or Warped Window Frames
Just like sliding patio doors, window frames will eventually break down and you’ll start to notice gaps where the air outside enters your home. If you are not sure of your windows’ age but suspect they are more than a decade old, it might be time to think about getting replacements. With regular exposure to elements, the window components wear out and break down over time.
2. Extreme Temperature Changes
Weather can have a significant impact on the condition of your windows. Extreme heat or cold will cause certain window materials (like wood) to expand and contract. It can warp, chip, crack, and fade because of fluctuations in temperature. Other materials like aluminum, fiberglass, and vinyl windows will perform better.
3. Improper Installation
As with anything that requires a professional to do the job, faulty doors and window installation will cause multiple problems. For instance, if the contractor doesn’t fit the window properly in the opening or fails to seal the window entirely, the gaps around the frame could cause a draft. Remember: installing windows should never be a DIY project.
4. Inadequate or Incorrect Maintenance
Most window materials are sturdy and require very little maintenance. Vinyl windows are usually the easiest to maintain. Wood windows are a little more difficult because you must sand and repaint them every few years. Clean any exposed weather stripping and keep the tracks lubricated regularly. is also important. Call a professional window contractor if you notice any cracks or dents to prevent further damage.
5. High Moisture Levels
Areas with high levels of rainfall will increase the wear and tear on windows. Similar to French doors, window’s exposure to moisture often results in a great chance of water leaks under the seals. Once the seal is broken, more air and moisture can get in, causing more damage. Consider fiberglass or vinyl windows as they are more resistant to moisture.
6. Unaddressed Mold
Moisture and window leaks often lead to mold. It can seep into the tracks, get inside the wall, and cause all kinds of damage. So if you notice mildew, clean it with an alcohol-based solvent right away. If you notice mold, get professional help for removal.
Renewal by Andersen of New Jersey is committed to installing only the highest quality products, protected by an industry-leading warranty. Find out how easy and affordable it can be to transform your home with Renewal by Andersen replacement windows – the windows homeowners prefer for performance and value.
Call (866) 609-5033 today to schedule your free in-home consultation or fill out our convenient online request form and we’ll contact you. We serve clients in Hillsborough, New Jersey.
