Cleaning the outside of your windows does not have to be a huge undertaking if you rely on a pressure washer to make the job easier. But since applying too much pressure can cause windows to break, it’s important to be very careful when pressure cleaning windows in Indianapolis. These helpful tips will ensure you get professional-quality results while also avoiding broken glass.
The colder the temperature, the more likely windows are to shatter, especially when they come into contact with warmer water in your pressure washer. So, wait for a warm summer or early fall day to pressure wash your windows rather than doing so first thing in the spring or late in the fall. Tackle the task in the afternoon once the windows have had a little time to warm up.
It’s not a good idea to power wash windows where the caulking between the panes has begun to decay or peel away, or with wooden sashes that have begun to break down. Spraying windows that are in poor condition may further damage them or even push the glass out of the sash entirely. If your windows are in poor shape, consider having them repaired or replaced.
When pressure cleaning windows in Indianapolis, the ideal pressure setting is between 60 and 80 PSI. This is enough pressure to get the windows clean, but not so much that there’s a huge risk of cracking the glass. If your pressure washer only has “low,” “medium” and “high” settings instead of having pressure options labeled in PSI, play it safe by opting for the lowest setting.
Do not aim directly at the windows. This may cause too much pressure to concentrate in one portion of the glass, which may break the window if it happens to have a weak spot. Instead, hold the sprayer at a 45-degree angle to the glass, and sweep back and forth as you spray.
Using dish detergent or a generic cleaner for home window cleaning may leave you with streaks. So, purchase a solution made specifically for pressure cleaning windows. Make sure you follow the instructions on the package closely to dilute the solution properly. Too high a concentration of some cleaners may leave a residue on the glass.
When pressure cleaning windows in Indianapolis, always spray the top of the window first and then work your way down. If you start at the bottom, any grime from the top of the window will drip down on your already-cleaned bottom, leaving your windows looking dirty.
When cleaning your windows, if you discover that some are beginning to break down and look a bit worn, consider window replacement by Renewal by Andersen Indianapolis. Contact us to schedule a free, in-home consultation.